User manual

05/04 Rev. 1.2-03 USER MANUAL Setup & Operation
AP4.4 – AP5.4
2
Installing the Printer
Unpacking the printer
1. Remove all loose objects from the packaging.
2. Carefully lift the printer together with the polystyrene cushions out of the
box. Have a second person keep hold of the box while you remove the prin-
ter.
Fig. 1: AP5.4 in the original packaging.
3. Remove the polystyrene cushions and plastic wrap from the printer. Having
someone else help you with this will also make it easier!
4. Place the printer on an even surface.
Carrying the Printer
One person can easily carry the AP4.4/5.4 because it only weighs 14kg.
« To carry the printer, grip the baseplate from the front and rear (see Fig. 1).
¯ CAUTION! - Do not lift the printer by holding the plastic parts on the front
and rear! This could damage the printer.
¯ CAUTION! - Do not grip the front cover when attempting to carry the prin-
ter! This could damage the printer.
Fig. 2: When lifting the printer, grip under the baseplate!
Packaging ¯ Please retain the original packaging for later use when transporting the
printer!