Technical data

5AFTER OPERATION

5.1 CARE AND CLEANING

ALS

380

Capacitive sensor at the dispenser head

Only if the labeller is equipped with a capacitive

sensor [76A] instead of the proper photoelectric sen-

sor:

➔ Remove the knurled thumb screw [76B].

➔ Remove 2 screws on the underside [77A].

➔ Remove the upper part of the housing [78A].

➔ Clean the sensor surfaces [78 arrows] with soft,

lint-free rags.

➔ Reassemble the sensor.

➔ Test the sensor adjustment.

[76] A Capacitive sensor

B Knurled thumb screw

[77] A Fastening screws for the housing on the underside

[78] A Upper part of the housing with sensor surfaces (arrows)