Technical data

3PRIOR TO OPERATING

3.2 MECHANICAL SETTINGS

ALS

380

3.2.5 Adjust (optional) the position

of the dispensing edge.

Adjusting vertically

Coarse adjustment:

➔ Open the central lock [23B].

➔ Hold the dispenser head firmly and open the lower

lock [23C].

➔ Slide the dispenser head to the desired height and

tighten the lock [23C].

Fine adjustment:

➔ Open the upper lock [23A].

➔ Rotate the spindle [23D] clockwise to move the dis-

pensing edge downward or rotate the spindle coun-

ter-clockwise to move the dispensing edge upward.

➔ Tighten the lock [23A]

➔ Tighten the central lock [23B].

For recurring adjustments when products are

changed:

➔ Use the scales on the guide columns.

[23] Adjustable dispensing edge (optional)