Technical data

30
3PRIOR TO OPERATING
3.2 MECHANICAL SETTINGS
ALS
380
3.2.4 Adjust the pressure roller unit
(optional) at the dispensing
edge.
Depending on the area of application, the labeller can
be equipped with an additional pressure roller
unit [22A] at the dispensing edge.
The most favourable positioning of the pressure roller
unit differs depending on the application.
For information on adjusting the pressure roller unit, the
responsible servicing technician is at your disposal.
To set the position of the pressure roller unit relative to
the label ribbon:
➔ Loosen the fastening screws [22B].
➔ Adjust the pressure roller
➔ Tighten the fastening screws.
[22] Optional pressure roller unit
A
B