Technical data

5AFTER OPERATION

5.1 CARE AND CLEANING

ALS

350

450

Capacitive sensor at the dispenser head

Only if the labeller is equipped with a capacitive sensor

[90A] instead of the proper photoelectric sensor:

£ Remove the knurled thumb screw [90B].

£ Remove 2 screws on the underside [91A].

£ Remove the upper part of the housing [92A].

£ Clean the sensor surfaces [92 arrows] with soft,

lint-free rags.

£ Reassemble the sensor.

£ Test the sensor adjustment.

[90] A Capacitive sensor

B Knurled thumb screw

[91] A Fastening screws for the housing on the underside

[92] A Upper part of the housing with sensor surfaces (arrows)