Technical data

4OPERATION

4.4 SETTINGS IN THE EXTENDED MENU

ALS

350

450

4.4.10 Polarity of the product sensor

(P_S_)

The product sensor can optionally send the start signal,

– the leading edge of the product passes the

sensor [82A].

– the trailing edge of the product passes the

sensor [82B].

In the extended menu:

£ Call up the P_S_ function.

£ Set the desired polarity.

– Set the LEDG: Triggered by leading edge

– Set the TEDG: Triggered by the trailing edge

£ Confirm the setting using the ENTER key and exit

the function.

4.4.11 Polarity of the label stop

sensor (S_S_)

The label stop sensor can optionally send the signal, if

– the leading edge of the label passes the

sensor [82A] (standard setting, with automatic label

compensation).

– the trailing edge of the label passes the

sensor [82B] (without automatic label compensa-

tion).

The function also allows the use of photoelectric sen-

sors with different polarities.

In the extended menu:

£ Call up the S_S_ function.

£ Set the desired polarity.

– Set the LEDG: Triggered by leading edge

– Set the TEDG: Triggered by the trailing edge

£ Confirm the setting using the ENTER key and exit

the function.

[82] Examples for different polarities of the product sensor:

A The sensor sends a signal at the product’s leading edge

(LEDG)

B The sensor sends a signal at the product’s trailing edge

(TEDG)

A B

[83] Examples for different polarities of the label stop sensor:

A The sensor sends a signal at the label’s leading edge (LEDG)

B The sensor sends a signal at the label’s trailing edge (TEDG)