Technical data

5
CONTENTS
ALS
350
450
Call up function . . . . . . . . . . . . . . . . . . . . . . . 67
Exit the extended menu . . . . . . . . . . . . . . . . 67
4.4.3 Position of second label
(POS2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
4.4.4 Position of third label. . . . . . . . . . . . . (POS3)68
4.4.5 Speed ratio . . . . . . . . . . . . . . . . . . . . (VERT)69
4.4.6 Adjust the label stop sensor (CONT) . . . . . . 70
Technology . . . . . . . . . . . . . . . . . . . . . . . . . . 70
Automatically adjusting the photoelectric sensor
70
Manually adjusting the sensor . . . . . . . . . . . 71
4.4.7 Label distance. . . . . . . . . . . . . . . . . . . (LPIT)72
Set distance . . . . . . . . . . . . . . . . . . . . . . . . . 72
Check setting . . . . . . . . . . . . . . . . . . . . . . . . 72
4.4.8 Distance from the label stop sensor to the dis-
pensing edge
(E–SS) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Set distance . . . . . . . . . . . . . . . . . . . . . . . . . 73
Check setting . . . . . . . . . . . . . . . . . . . . . . . . 74
4.4.9 Product length . . . . . . . . . . . . . . . . . (PRDL)75
4.4.10 Polarity of the product sensor
(P_S_). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
4.4.11 Polarity of the label stop sensor . . . . (S_S_)76
4.4.12 Number of unlabelled products
(MLAB) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
4.4.13 Electronic transmission ratio of the RPM trans-
mitter (EGRA) . . . . . . . . . . . . . . . . . . . . . . . . 77
4.4.14 Advance print start . . . . . . . . . . . . . . . (PDT)78
4.4.15 Printer dwell time . . . . . . . . . . . . . . .(PDWT)78
4.4.16 Tandem operation. . . . . . . . . . . . . . .(TMOD)79
4.4.17 Applicator type . . . . . . . . . . . . . . . . . (APPL)79
4.4.18 EP cylinder dwell time. . . . . . . . . . . . (APT1)79
4.4.19 Blowing time . . . . . . . . . . . . . . . . . . . (APT2)79
4.4.20 Delay time . . . . . . . . . . . . . . . . . . . . (APT3)79
4.4.21 Fine tuning of the dwell time
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . (APT4)79
4.4.22 Delete a product data bank
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . (LOAD)79
4.4.23 Create/save product data bank
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . (SAVE)79
4.4.24 Delete a product data bank
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (DEL)79
4.5 Automatic dispensing speed (APSF) 80
4.5.1 Principle of operation . . . . . . . . . . . . . . . . . . 80
4.5.2 Electronic transmission ratio of the RPM trans-
mitter . . . . . . . . . . . . . . . . . . . . . . . . (EGRA)81
Setting the compensation factor. . . . . . . . . . 81
Test the setting. . . . . . . . . . . . . . . . . . . . . . . 81
4.6 Applicator (optional) . . . . . . . . . . . . . 82
4.6.1 Principle of operation . . . . . . . . . . . . . . . . . . 82
4.6.2 Functions in the extended menu . . . . . . . . . 83
Please observe the following: . . . . . . . . . . . 83
Calling up the extended menu. . . . . . . . . . . 83
Applicator type . . . . . . . . . . . . . . . . . .(APPL)83
EP cylinder dwell time . . . . . . . . . . . .(APT1)84
Blowing time. . . . . . . . . . . . . . . . . . . . (APT2)84
Delay time . . . . . . . . . . . . . . . . . . . . . (APT3)84
Fine tuning of the dwell time . . . . . . .(APT4)85
5 After operation
5.1 Care and cleaning . . . . . . . . . . . . . . 86
5.1.1 Cleaning agents . . . . . . . . . . . . . . . . . . . . . . 86
5.1.2 Regular maintenance. . . . . . . . . . . . . . . . . . 86
Remove paper waste . . . . . . . . . . . . . . . . . . 87
Braking brush. . . . . . . . . . . . . . . . . . . . . . . . 87
Capacitive sensor at the dispenser head. . . 88
6 Operational malfunctions
6.1 Warning messages. . . . . . . . . . . . . . 89
6.1.1 Please observe: . . . . . . . . . . . . . . . . . . . . . . 89
6.1.2 If a problem occurs. . . . . . . . . . . . . . . . . . . . 89
6.1.3 Warning messages . . . . . . . . . . . . . . . . . . . 89
6.2 Error messages . . . . . . . . . . . . . . . . 91
6.2.1 If a malfunction occurs . . . . . . . . . . . . . . . . . 91
6.2.2 Error codes. . . . . . . . . . . . . . . . . . . . . . . . . . 91
7 Appendix
7.1 Factory settings . . . . . . . . . . . . . . . . 95
7.2 Product databanks . . . . . . . . . . . . . . 97
7.3 EC Declaration of Conformity. . . . . . 99