Technical data

3PRIOR TO OPERATING

3.1 INSERT THE LABELLING MATERIAL – ALS 350

ALS

350

Guide the label ribbon around the dispens-

ing edge

£ Unthread approximately 2 m of label ribbon from the

label roll.

£ Guide the label ribbon around the first deflection

roller [20A] and through the slot in the photoelectric

sensor [20C] [21A].

£ Guide the label ribbon under the pressure roller unit

[20B] to the dispensing edge [20D].

£ Guide the label ribbon around the dispensing edge

to the 2nd deflection roller [20E].

£ Thread the label ribbon around the upper deflection

roller [20F].

[20] Guides for the label ribbon in the dispenser head section

A 1st dispenser head deflection roller

B Pressure roller unit

C Label stop sensor

D Dispensing edge

E 2nd dispenser head deflection roller

F Upper deflection roller

[21] A Label stop sensor