Technical data

22
2EQUIPMENT DESCRIPTION
2.2 OVERVIEW OF THE ALS 450
ALS
450
2.2.3 Technical data
Characteristic values
Labels
Ambient conditions
Dimensions
Casing
Electrical system
1) Customer options
Control system
Emissions
Labelling speed: 0.5 m/min to 55 m/min
Labelling performance: Refer to the service guide
Stop accuracy (at the
dispensing edge): ± 0.5 mm
Unwind unit: Unwinding spindle with
spreader mechanism
Rewind unit: Spreader mechanism
Operation: Programmable, can be set
via the operator panel,
11 data bases available
Speed control: Automatic dispensing
speed, with RPM-
transmitter
Label width
(incl. backing material): 10 mm to 230 mm
Label length
at maximum dispen-
sing speed:
maximum 350 mm
16 mm to 250 mm
Label roll
Outer diameter:
Core diameter:
maximum 400 mm
76.2 mm
Temperature
Operation:
Storage:
5 °C to 40 °C
5 °C to 70 °C
Relative humidity: 30 % to 80 %,
not condensing
Dimensions
Width:
Height:
Depth:
735 mm
795 mm
560 mm
Weight 85 kg
Covering for the control-
electronics:
Polyurethane (PUR),
10 mm thick
Front plate: Aluminium, anodized,
15 mm thick
Power consumption: 500 VA
Mains connection
Nominal voltage: 110 V/120 V/130 V/200 V/
220 V/230 V/240 V
1)
Frequency: 50 Hz / 60 Hz
1)
Type of protection
IP41: protected against vertically
falling drops of water, not
protected against sprayed
water
IP54 (optional): Protected against splash-
ing water and dust layers
Drive system
IP41: 2 stepping motors,
1 AC motor
IP54 (optional): 3 stepping motors
Control electronics:
IP41: Integrated
IP54 (optional): The electronic control unit
and operator panel are built
into a separate switch cab-
inet
Options: – Serial interface
– Roll diameter control
Sound pressure level at
a distance of 1 m: 75 db (A)