Technical information

Operators Manual
ALS 221
Release 7/04 Page 32 Technical specification
6. Technical specification
The following data are maximum values. Depending on label material, operation environment
and labelling condition the real value could be lower.
6.1 Technical Information
Description Details
Label width:
incl. Backing paper
10 mm ... 100 mm
Label length 10 - 220 mm
Diameter label roll max. 300 mm
Core diameter label roll 37 mm
Labelling speed 2 - 30 m/min
Material transport 0,125 mm per motor step
Accuracy at dispensing
edge
± 0,5mm
Labelling rate
see performance charts
Rewind 4 pin mandrel
Dispensing edge V- shape, fixed
Versions available Left and right hand
Dimensions (B,H,T) 550 * 600 * 300 mm incl. Dispensing edge
Weight 23 kg
Display panel 4 digit LED display, 6 membrane keys
Label sensor Infrared sensor, automatic adjustment possible
Certification Confirms all relevant actual European standards
Protection class IP 41, IP54 on request
Operating environment 5 – 40°C, storage 0 – 70°C
30 - 80%, non condensing
Power consumption 300 VA
Mains voltage 100V~, 115V~, 200V~ and 230V~ 50/60Hz (6.3A for 110V else
3.15A),
+5%- 10%