Instruction manual

Option Errors
Error
Code
Description
200
Option number must be 1, 4, 30, 31, 42, 50, 51, 52, 60, or 61.
201
Copy length is outside the range 0 to 2710.
202
Copy start position must be 1 to 2710.
203
Destination start position must be 1 to 2710.
204
Source field must be 0 to 999.
205
Copy type must be 1 (copy after rules) or 2 (copy before rules).
206
Increment/Decrement selection must be I (increment) or
D (decrement).
207
Incrementing start position must be 0 to 2710.
208
Incrementing end position must be 0 to 2710.
209
The incrementing amount must be 0 to 999.
210
Security value for a PDF-417 bar code must be 0 to 8. Correct the value and resend
the format to the printer.
211
Narrow element value is less than 1 or greater than 99. Correct the value and resend
the format to the printer.
212
Wide element value is less than 1 or greater than 99. Correct the value and resend
the format to the printer.
213
Dimension must be 1 to 30 for a column or 3 to 90 for a row on a PDF417 bar code.
214
Truncation code must be S (standard) or T (truncated bar code).
215
Aspect code must be C (columns) or R (rows).
216
Option definition must be S (set) or T (template).
217
Input device must be D (Default), H (Host), K (Keyboard), N (None), or S (Scanner).
218
Pad direction must be L (from left) or R (from right).
219
Pad character is outside the range 0 to 255.
220
Check digit selection must be G to generate check digit.
221
Primary or secondary price format is outside the range 1 to 16.
222
Data type restriction is outside the range of 1 to 6.
223 Option is not valid for the field.
224
Bar code intercharacter gap must be 0 to 99 dots. (This is also known as the
additional character gap when using Option 50, Defining Bar Code Densities.)
DIAGNOSTICS AND ERRORS 8-7