Instruction manual

L7. thickness Using the chart below for reference, write the line thickness
(1 to 99) in box L7. Line thickness fills upward on horizontal lines, or to the right on vertical lines.
Measured in dots.
L8. “pattern” Line pattern. Enter "".
Example L,S,110,30,110,150,10,"" p
Defines a horizontal line field as a segment starting at row 110, column 30 and ending at row
110, column 150. The line thickness is 10 dots.
Defining Box Fields
Use boxes to form borders or highlight items of interest. Define each box field separately. This
field is not assigned a field number, but is counted as a field (keep this in mind, as the printer
allows a maximum of 1000 fields per format). You can define any line length and a thickness up
to 99 dots, as long as the solid black print does not exceed 25 percent of any given square inch
of the label.
Syntax Q,row,column,end row,end col,thickness,"pattern" p
Q1. Q Box (Quadrilateral) Field.
Q2. row Distance from bottom of print area to
lower left corner of box.
English 0 - 999
Metric 0 - 2539
203 Dots 0 - 2029
300 Dots 0 - 2699
Q3. column Distance from left edge of print area to lower left corner of box.
English 0 - 399
Metric 0 - 1015
203 Dots 0 - 811
300 Dots 0 - 1199
DEFINING FIELDS 3-19