Instruction manual

Syntax L,type,row,column,angle/end row,length/end col,thickness,

"pattern" p

L1. L Line Field.

L2. type Type of line. Only vertical and horizontal lines are supported. Options:

S Segment. You choose the starting point and

ending point.

V Vector. You choose the starting point, angle, and

length.

L3. row Distance from bottom of print area to the starting point.

English 0 - 999

Metric 0 - 2539

203 Dots 0 - 2029

300 Dots 0 - 2699

L4. column Distance from left edge of the print area to line origin.

English 0 - 399

Metric 0 - 1015

203 Dots 0 - 811

300 Dots 0 - 1199

L5. angle

/end row

If Using Segments:

Row location of ending point. Measure from bottom

of the print area. Ranges same as row above. On

horizontal lines, this value must match item L3.

If Using Vectors:

Angle of line. Options: 0, 90, 180, or 270.

L6. length/

end col

If Using Segments:

Column location of end point. Measure from left edge of print area.

Ranges same as column above. On vertical lines, this value must

match parameter L4.

If Using Vectors:

Length of the line in selected units.

Ranges for horizontal lines: