Instruction manual

T15. sym set Symbol set. Use 0 for the Internal Symbol Set. For scalable or TrueTypeâ fonts, use:
1 ANSI Symbol Set
102 Unicode (user input) for particular mapping
437 DOS Code Page 437 (Domestic)
850 DOS Code Page 850 (International)
852 DOS Code Page 852 (Latin 2)
855 DOS Code Page 855 (Russian)
857 DOS Code Page 857 (IBM Turkish)
860 DOS Code Page 860 (MS-DOS Portuguese)
1250 DOS Code Page 1250 (Latin 2)
1251 DOS Code Page 1251 (Cyrilic)
1252 DOS Code Page 1252 (Latin 1)
1253 DOS Code Page 1253 (Greek)
1254 DOS Code Page 1254 (Turkish)
1255 DOS Code Page 1255 (Hebrew)
1256 DOS Code Page 1256 (Arabic)
1257 DOS Code Page 1257 (Baltic)
1258 DOS Code Page 1258 (Vietnamese)
The Standard, Reduced, Bold, OCRA and HR fonts only support the Internal Symbol Set (0). The
CG Triumvirateä typefaces support only the ANSI and DOS Code 437 and 850 symbol sets. The
scalable font (font 50) does not support Code Page 1256 (Arabic). Code pages 852-860 and
1250-1258 are for downloaded TrueType fonts or the scalable font. Symbol Set 102 (Unicode)
requires a downloaded International TrueType font (stored on a memory card). TrueType fonts are
designed to be regionally specific; therefore, all code pages may not be supported in a given font.
See Appendix C, "Symbol Sets/Code Pages" for more information.
Example T,2,10,V,50,80,0,1,1,1,B,C,0,0,0 p
Defines a text field (field #2) with a variable length of up to 10 characters. The field begins at
row 50, column 80. There is no additional gap between characters, and the Standard font is
used without any additional magnification. The printing is black on white and centered. No field
or character rotation is used. The internal symbol set is used.
Defining Bar Code Fields
Each bar code field requires a separate definition.
Syntax B,field#,# of char,fix/var,row,column, font,density,height,text,
alignment,field rot p
B1. B Bar Code Field.
B2. field# Unique number from 1 to 999 to identify this field.
B3. # of char Maximum number of characters. If the bar code uses a check digit, allow an extra character for the
check digit. The actual maximum number of characters is limited by the size of the label and bar
code density. Range: 0 to 2710.
For Quick Response bar codes, this number includes header information. The maximum depends
on the type of characters entered for the batch data and differs for the two models of the bar code.
Data Type Model 1 Model 2
Numeric Data 1167 2710
Alphanumeric data 707 2710
8-byte data 486 2710
Kanji data 299 1817
Note: The maximum number of characters depends on the selected level of error correction. As
you increase the error correction level, the maximum number of characters decreases.
3-6 DEFINING FIELDS