Instruction manual

Note:
Solid black print should not exceed 25% on a given square inch of the label, or the
printhead life may be decreased.
Field placement in the packet is an important consideration when using field color attributes. If a
line field is defined before the overlay (text or constant text) field, the line field is blocked out by the
overlay field, depending on the overlay field’s color attribute. If a line field is defined after the
overlay field, the line field is not blocked out by the overlay field, regardless of the overlay field’s
color attribute.
T12. alignment Options:
L Align on left side of field.
C Center text within field (monospaced fonts only)
R Align on right side of field (monospaced fonts only)
B Align at midpoint of field
E Align at endpoint of the field
Use L, B, or E for any font.
T13. char rot Character rotation. The field or supply does not rotate, only the characters do. Options:
0 Top of character points to top of field
1 Top of character points to left of field
2 Top of character points to bottom of field
3 Top of character points to right of field
Note: Font 50 and downloaded TrueType fonts do not support character rotation.
T14. field rot Field rotation. Field rotation rotates the whole field, not just the characters. Rotation is affected by
the pivot point, which varies depending on how text is justified. Lower left corner of field is the pivot
point. Options:
0 Top of field points to top of supply
1 Top of field points to left of supply
2 Top of field points to bottom of supply
3 Top of field points to right of supply
DEFINING FIELDS 3-5
Line field
blocked out by
opaque field
using attribute B
Line field not
blocked out by
transparent field
using attribute O