Instruction manual

Spacing Monospaced (0) or proportional (1).
Type Bitmapped (0) or scalable (1).
Baseline Bottom of the font.
Cell Width Horizontal number of dots to contain the widest character.
Cell Height Vertical number of dots to contain the tallest character.
Nominal Width Average width for lower-case letters.
Nominal Height Average height for lower-case letters.
Inter-Character
Gap
Default spacing between characters in monospaced fonts.
Printhead Density Shows that a 203 (0) dpi or 300 dpi (1) printhead is used. The scalable font
(font 50) does not report a value for printhead density.
Uploading Format Header Information
You can upload format header information from the formats in memory to check the supply
length and width for each format.
Syntax {header,format#,action,device p }
F1. header Format Header
F2. format# Format number from 0 to 999. 0 is for all formats in memory.
F3. action Action. Options:
A Adds the specified format
C Clears the specified format
H Uploads format header information
F4. device Device. Options:
R Volatile RAM
Z All devices (use for upload)
Example {F,0,H,Z p }
Selects all formats in memory and returns the following:
Example {F,0,H,Z p
Fmt_1,406,406 p
Fmt_10,324,406 p
Fmt_15,812,812 p
Fmt_20,305,609 p
Fmt_25,1218,406 p }
Displays the format number, supply length and supply width (in dots) for each format in memory.
Example {F,1,H,Z p }
Selects format1 and returns the following to the host:
{F,1,H,Z p
Fmt_1,406,406 p }
Displays the supply length and supply width (in dots) for format1.
2-16 CONFIGURING THE PRINTER