Instruction manual

Defining the System Setup Packet
Use the system setup packet (A) to select the power up mode, display language, print
separators between batches, print a “slashed zero,” and select the symbol set.
Syntax {I,A,powup_mode,lan guage,sep_on,slash_zero,sym bol_set p}
A1. A System Setup Packet
A2. powup_mode Online Mode. Enter 0.
A3. language Display Language. Enter 0.
A4. sep_on Batch Separators. Enter 0. The printer does not print batch separators.
A5. slash_zero Slash Zero. Enter 0. The printer does not print a zero with a slash through it.
A6. symbol_set Symbol Set. Options:
0 Internal (default)
1 ANSI
2 Code Page 437 (Latin U.S.)
3 Code Page 850 (Latin 1)
4 Code Page 1250 (Latin 2)
5 Code Page 1251 (Cyrillic)
6 Code Page 1252 (Latin 1)
7 Code Page 1253 (Greek)
8 Code Page 1254 (Turkish)
9 Code Page 1255 (Hebrew)
10 Code Page 1256 (Arabic)
11 Code Page 1257 (Baltic)
12 Code Page 1258 (Vietnamese)
13 Code Page 852 (Latin 2)
14 Code Page 855 (Russian)
15 Code Page 857 (IBM Turkish)
16 Code Page 860 (MS-DOS Portuguese)
19 Unicode
The Standard, Reduced, Bold, OCRA and HR fonts only support the Internal Symbol Set (0). The
CG Triumvirateä typefaces support only the ANSI and DOS Code 437 and 850 symbol sets. The
scalable font (font 50) does not support Code Page 1256 (Arabic). Code pages 852-860 and
1250-1258 are for downloaded TrueType fonts or the scalable font. Symbol Set 19 (Unicode)
requires a downloaded International TrueType font (stored on a memory card). TrueType fonts are
designed to be regionally specific; therefore, all code pages may not be supported in a given font.
See Appendix C, "Symbol Sets/Code Pages" for more information.
Example {I,A,0,0,0,1,0 p }
Powers up the printer in the online mode, displays prompts in English, does not print a
separator after each batch, prints zeros with slashes through them, and uses the internal symbol
set.
2-6 CONFIGURING THE PRINTER