Instruction manual

Reduced
1x 7x
1/100 in. 6.9 48.28
1/10 mm 17.5 122.6
dots 14 98
Bold
1x 7x
1/100 in. 16.7 117.24
1/10 mm 42.4 297.8
dots 34 238
OCRA-like (1x only)
1/100 in. 11.8
1/10 mm 30
dots 24
Proportional Font Magnification
Each character in a proportionally spaced font is a different height and width. You may be able
to place more characters on a line using proportionally spaced fonts. You may want to
experiment with these fonts and adjust field measurements in your format as needed. The
bitmapped fonts (either monospaced or proportional) appear jagged when magnified.
The magnification range is 1 to 7. The following tables provide height and width magnification
of sample characters.
CG Triumvirate™ Type face Bold (9 pt.)
Width Mag. Minimum Average Maximum
1x 1/100 in.
1/10 mm
Dots
1.48
3.76
3
6.4
16.26
13
10.8
27.4
22
7x 1/100 in.
1/10 mm
Dots
10.3
26.2
21
44.8
114
91
75.9
192.8
154
To calculate other font widths, multiply the font dots (3 dots for Minimum, 13 dots for Average,
22 dots for Maximum) by the magnification.
Example
13 (Average font dots) x 5 (magnification) = 65 dots in an average letter of the CG Triumvirate™
Typeface Bold at 5x.
FONTS B-5