Instruction manual

426 Internal software list error. Call Technical Support.
427
Format name is invalid. Valid name is 1 to 8 characters inside quotes or "" for a
printer-assigned name. Press the FEED button and try to continue. If the error
reappears, call Technical Support.
428
Batch name is invalid or graphic not found. Press the FEED button and try to
continue. If the error reappears, call Technical Support.
429 A field number appears more than once in a format.
433 The batch references a field number that does not exist in the format.
497 An error occurred during the loop back test on the parallel port. Call Service. Only
valid for printers with a parallel port.
499 An error occurred during the loop back test on the serial port. Call Service.
Data Formatting Failures
Formatting errors indicate that a field will print incorrectly. After you have checked the data
stream and corrected the data, retransmit the format and batch.
Note: For errors 571-622, the batch still prints, but the field, font, bar code, or density may be
incomplete, missing or contain incorrect data.
Error
Code
Description
571 UPC or EAN bar code data length is invalid. The bar code data length in the batch
does not fit the format.
572 A copy field, padded field, or incrementing field length is invalid. The field length in
the batch does not fit the format or the field contains blanks. Or, the fixed length field
does not contain the specified number of characters.
573 Price field length is invalid. The price field length in the batch does not fit the format
or the field contains blanks.
574 No CD scheme or room for CD. The CD scheme in the batch does not fit the format or
the field contains blanks.
575 The graphic included in your format could not be found. Resend the graphic packet.
If the error persists, call Technical Support.
600 The printer could not image the batch, because the batch was refused. Call Technical
Support.
601 An error occurred while the batch was imaging. Resend the format, batch, font,
and/or any graphic packets. If the error persists, call Technical Support.
603 The batch was not found while imaging. Resend the batch packet. If the error
persists, call Technical Support.
611 Font, bar code or density is invalid. The font, bar code or density in the batch does
not fit the format.
DIAGNOSTICS AND ERRORS 8-11