User guide

7 IX series Quick User Guide
External battery
If your machine is powered from an external battery, you must
connect the battery to switch on the machine and disconnect it
to switch off using the battery cable supplied. Check that the
red lead goes to the positive terminal and the black lead goes
to the negative terminal.
Internal battery backup (optional)
The internal battery provides short term protection in the
event of a power supply failure. The change over to battery
power supply is completely automatic as long as the separate
On/Off switch for the internal battery is set to ON.
This switch should be ON at all times while the machine is
connected to the mains power supply.
If the machine is not connected to a mains power supply the
battery switch must be OFF
Before you begin
You can find comprehensive instructions for using your
machine in `User Instructions’ on the CD that accompanies
the machine. The instruction books include all the functions
available across the range of IX machines. This means that
some of the functions may not be available at your machine.
You should ignore those sections which do not apply.
Keyboard overlay
Your machine is fitted with a reversible keyboard overlay. You
need to display the manager overlay in order to program the
machine.
1. Hold the overlay by the tab and slide it down to remove it
from behind the clear protective cover.
2. Reverse the overlay to reveal the programming side.
3. Slide the top edge of the overlay up under the protective
cover until the bottom edge rests on the supports.