IX series Retail Counter Scale Quick User Guide This booklet describes the functions you need to start using your scale immediately. For further detail and more advanced functions consult the User Instructions on the CD provided. ENGLISH 76103-832 Issue 02 C 07.07.
©Avery Berkel Limited 2003. All rights reserved. The information contained herein is the property of Avery Berkel Limited and is supplied without liability for errors or omissions. No part may be reproduced or used except as authorised by contract or other written permission. The copyright and the foregoing restriction on reproduction and use extend to all media in which the information may be embodied.
Declaration of Conformity Manufacturer Avery Berkel Type IX series No.
Safe installation For your protection, all mains (110V or 230V) equipment used where damp or wet conditions may occur, must be supplied from a correctly fused source and protected by an approved RCD to BS7071 or BS7288 or IEC1008-2-2 BS EN 61008:1995. The mains plug must be inserted into a socket outlet with a protective earth contact. The electrical supply at the socket outlet must provide over-current protection of an appropriate rating.
To avoid the possibility of electric shock or damage to the machine, always switch off the machine and isolate from the power supply before carrying out any routine maintenance. Training Do not attempt to operate or carry out any procedure on a machine or network unless you have received the appropriate training or read the instructions books provided.
Legal requirements 8 +40°C 84 8 -10°C 4 +40°C -10°C Fitting the tower display (IX202/IX212) Remove weigh pan Ensure that cables are not trapped when screwing down the plate.
External battery If your machine is powered from an external battery, you must connect the battery to switch on the machine and disconnect it to switch off using the battery cable supplied. Check that the red lead goes to the positive terminal and the black lead goes to the negative terminal. Internal battery backup (optional) The internal battery provides short term protection in the event of a power supply failure.
Function keys (sales keyboard) Resets an out of balance scale. Subtracts the weight of the container when weighing goods. In receipt mode, retains the PLU until the transaction is entered. Retains a tare, if in operation, until it is cancelled. In label mode, the PLU is retained until it is cancelled. Sets the machine to pre-pack if the machine configuration allows it. Cancels a PLU or hand entered price. Depending on the function in use, clears messages or characters from the display.
Switches the scale to or from hand price or PLU operation. Initiates a display test sequence. Pressed again during the test sequence prints a test report. Press operator key and type in PIN during test sequence to gain access to Manager Mode. Press and hold for three seconds to switch on the machine. Press and hold for three seconds to switch off the machine. Programmable keys The white, numbered, keys on the sales keyboard are programmable keys.
Basic programming Entering manager mode 2SHUDWRU 1XP During test display 0DQDJHU 0RGH PIN Exiting manager mode To exit Manager Mode: Operator PIN The default operator number is 1 and the default operator PIN is 4296. For added security, give each operator a PIN that is different from the one set up.
Manager Menus The complete programming menus for the IX model that you have can be found on the separate sheet supplied with the machine. This guide shows you the keys you should use to move around the menu system and select menu items. Your programming keyboard overlay has keys that allow you to go directly to some of the menu items. Move to menu item below. Select menu item displayed. Move to menu item above. Move to top level of menu. When at top level of menu, return to operator mode.
Programming products The minimum product information required for you to be able to use your scale is PLU number and unit or item price. However, it is useful to program a brief description for the display text, and a label format if you are using label mode.
Create/edit PLU Example:Programming PLU record with description and price. All other options disabled. See previous page. Manager mode PLU number PLU display text Select unit/item price PLU ? Assign PLU key Unit/item price Assigning PLU keys Manager mode PLU ? PLU number Assign PLU key Changing prices Use this function if you want to change only the unit/item price .
Programming operators Manager mode X2 Operator number 0-8 Operator name PIN Re-enter PIN Security level 0-2 Trading/Training Logged On/Off Assigning operator keys Manager mode Operator number 0-8 IX series Quick User Guide Assign Operator Key 14
Assigning payment keys (not IX110 and IX212) Example:Assigning payment key 1 (cash) Manager mode X3 System Data X2 Machine Setup ECR Assign Standard Assign Payment Payment Key No.
Counter receipts If your machine is operating in receipt mode (e.g. IX110 and IX212 machines) but not in PoS mode you can print a counter receipt. Press . to print the receipt. Displaying customers’ change You can display the change required by a customer while the receipt is being printed.
Label machines Printing labels Sales mode Operator functions Using the overide key Sales mode or PLU number r1 Operato Maria New price or Receipt mode Label mode Using the FIX key Sales mode PLU and/or Tare r1 Operato ri a M a Receipt mode or Label mode 17 IX series Quick User Guide
Using a tare Sales mode Zero Net NJ Zero Net or NJ PLU number r1 Operato a Mari or Receipt mode IX series Quick User Guide Label mode 18
Paper route Labels with backing rewound Continuous paper Receipts and reports Rewinding the backing paper (labels) 1 2 3 4 5 6 Clean regularly snap swab 19 IX series Quick User Guide
This document contains a general guide only of the product and shall not form part of any contract unless specifically agreed by Avery Berkel Limited in writing in each case on the Order Acknowledgement. The specification of the products described herein may vary from time to time and may be altered without notice.
