User manual

31498AB 13
AVERTX IP FINDER
Use the included IP Finder software to easily find your network cameras
for initial setup. The AvertX IP Finder software is included on the CD
with all AvertX IP devices.
Finding IP Cameras
1. Open the Software CD on the recorder.
2. Click Software on the software disc menu.
3. Click AvertX IP Finder.
4. Click Device Search on the Device Search window.
5. If a Windows Security Alert window opens, click Unblock to allow
the IP utility to access your network.
6. Click Device Search again to find all connected IP devices.
Tip The default IP address of your IP camera is 192.168.0.250
7. Right-click the desired network device and select Browse.
8. Type the default username and password in the login window to
access the video server using your internet browser.
Note If you cannot conenct to the camera you may need to change
the camera’s IP address to match your network settings.
Default Username and Password
The username and password are case sensitive. It is strongly
recommended that the password be changed after the initial setup to
prevent unauthorized access.
Username – Admin
Password – 1234
Changing the Network Type
You can change the network type from Static IP to DHCP easily from
the list of connected IP devices. To change the network type to DCHP:
1. On the list of connected IP devices locate the desired camera and
record the MAC address,
2. Right-click the camera row and select Network Setup.
3. Select the DCHP option on the Network Setup window and then
click Apply.
4. Click OK to acknowledge the change.
5. After one minute, click Device Search to search for all connected
IP devices.
6. Locate the camera using the MAC address recorded earlier and
double click the camera row.
7. Type the Username and Password to access the camera.
The M ight y Sq uir rel Co ntr oller