User manual

Setup

System

Admin Password

To change the administrator password, type a new password in the

Admin Password box and confirm below.

Note The maximum length of the password is 14 characters. The

following characters are valid: A-Z, a-z, 0-9, !#$%&’-.@^_~.

Network

You can choose to use a fixed IP address or a dynamic IP address

(assigned by a DHCP server or router) for the camera.

Get IP address automatically (DHCP)

The camera comes preconfigured with a fixed IP address, selecting Get

IP address automatically requires a router or DHCP server to assign

an IP address to the camera.

Note Every network device has a unique Media Access Control

(MAC) address that can be used for identification. The MAC

address is located on the bottom of each camera, and on the

box label (AvertX IP Finder also displays the MAC address for

identification). Record your camera’s MAC address for

identification in the future.

Use fixed IP address

To set up a new static IP address:

1. Select the Use fixed IP address option.

2. Type a new IP address in the IP address box.

3. Type a new address in the Default Gateway box.

4. Click Save to confirm the new setting.