User manual

72
AVERTX REMOTE FOR MAC
Product Description
AvertX Remote allows you to access, search, and playback video
recorded on your HDIP recorder using a Mac computer.
Features
• Connect to up to 9 HDIP recorders simultaneously
• View live video from multiple channels simultaneously
• Control PTZ cameras
• Playback recorded videos stored on your HDIP recorder
System Requirement
To run AvertX Mac Remote, your Mac should meet these requirements:
Minimum
CPU: Intel Core 2 Duo 2.4 GHz
RAM: 2GB
Recommended
CPU: Intel Core i52.3GHz or above
RAM: 2GB or more
Downloading AvertX Remote
To download the software, open the Internet browser on your Mac and
go to the Mac App Store. Search for AvertX Remote, and then
download the software, following the instructions provided. Once it is
downloaded, locate the program in Launchpad, and click to start the
program.
Using AvertX Remote
Connect to Your Recorder
1. In the Device Manager section, click +.
2. Type the Name, IP address, and Port number for your HDIP
recorder.
Note The port number must match the port number set in Port
Forwarding on your HDIP recorder. The default port is 80.
3. Type the Username and Password of an Administrative account
on your HDIP recorder.
4. Click Save to add the recorder to the site list.
5. Click Connect to immediately connect to your recorder.
Note You can connect to up to 9 HDIP recorders simultaneously.
Editing a Recorder
1. To edit the information for a recorder, select the recorder in the list,
and then click Edit.
2. Type the correct information into the fields, and then click Save.