User manual

52
LOGIN
If Password Protection is turned On, you will need to log in to your
recorder to search and export video or change settings. To log in to your
recorder, you will need to have a user name and password assigned by
the administrator.
1. Right-click in the Live screen.
2. Click admin or user, depending on your account.
3. Use the on-screen keyboard or a USB keyboard to type your
password. The default password for the admin account is 1234.
The default password for the user account is 4321.
4. Click OK.
Change the Admin Password
To prevent unauthorized changes to the recorder settings, AvertX
recommends changing the default admin password.
1. Right-click in the Live screen and click Menu.
2. Log in and an administrator.
3. Click Users.
4. Click Account Setup.
5. Click Edit next to the Password field and then use the on-screen
keyboard or a USB keyboard to type a new password.
Note Passwords require a minimum of four characters; maximum of
eight characters.
6. Click OK.
7. Click Save.
Adjust Permission Level
Requirement for Menu Access
By default, the HDIP system is set to allow only the Administrator to
access the menu. To change this permission level, follow these
instructions.
1. Right-click on the Live screen and click Menu.
2. Log in as an Administrator.
3. Click Users.
4. Click Permissions Setup.
5. Click Menu Access and select your desired permission level to
access the menu. The lowest level is Level 1, which will allow all
authorized users to access the menu.
6. Close Permissions Setup.
7. Right-click to exit the User menu.
8. Right-click to exit the Main Menu screen.
9. To log off as the Administrator, right-click in the Live screen and
click Exit.