User manual

50
Remotely Update the Firmware on
Your HDIP Recorder
You can update the firmware on your recorder, even if you are in a
different location. This option is also helpful if the recorder is installed in
an inaccessible location.
1. On your computer, open Internet Explorer, and then go to
https://www.avertx.com/product-downloads.
2. Locate your recorder model on the page and click Firmware to
download the file.
3. Locate the folder on your computer and unzip or extract the files.
The folder will contain two folders: upd_900s, and upd_900g2s.
Firmware version
Recorder model
upd_900s
NV160-P2A
NV80-P2B
NV80-P2A
upd_900g2s
NV160-P2B
Note The firmware file contains firmware for several HDIP recorder
models. You must select the appropriate version to install
based on the model of your recorder. The model number of
your recorder is indicated in Menu > System/Version
Information.
4. Type the IP address or DDNS address of the recorder in the
address bar to open the AvertX Remote Viewer.
5. Click Menu.
6. Click System/Version Information.
7. Click Software Upgrade Via Internet.
8. Click Execute and locate the firmware update files folder.
9. Select the firmware file and click Open to start the upgrade
process.
Note Your HDIP recorder will restart itself during the upgrade
process. Once it has restarted, the firmware update is
complete.
FPGA Upgrade Via Local Device
This is a factory function that will not be accessed by end users.
System Log
System Log allows you to review and export the system log. To review
the System Log, click System Log. Use the arrow buttons to navigate
the pages of entries.
Exporting the System Log
Follow these instructions to export the system log.
1. Connect a USB storage device to the recorder.
2. Click System Log.
3. Click Export.
Note The system log will automatically be exported to the connect
USB device as a text file.
Note The system log text file will be located in subfolders
designating the time and date of the export. In the root of the
USB device will be a folder labeled in the format YYYMMDD;
within this folder will be a subfolder labeled in the format
HHMMSS; and with this will be the log file export in the format
LOG_HHMMSS.TXT.
Operation Log
Operation Log allows you to enable or disable the logging of user
activity. When enabled, user activities (log ins, setting changes, video
exports) will be included in the System Log. When disabled, user
activities will not be included in the System Log.
Click Operation Log and select On or Off to enable or disable this
function as desired.