User manual

3222AD 49
INFO
Use the INFO menu to view system information such as hardware and
software version, and network address information. You can also
upgrade your software, configure the operation log, and view the system
log.
Model Name – Displays the model identifier of the recorder.
MAC Address – Displays the MAC (Media Access Control) of the
recorder.
Network Address – Displays the IP Address of the recorder (can be
customized via the Network menu).
Hardware – Displays the hardware version of the recorder.
Software – Displays the software version of the recorder (can be
upgraded via the System menu).
Software Upgrade
Before upgrading HDIP firmware, contact AvertX Technical support to
confirm this course of action as appropriate for your recorder.
Update the Firmware on Your HDIP
Recorder
You can upgrade your firmware using a USB storage drive.
1. On a computer, open your browser and go to
https://www.avertx.com/product-downloads.
2. Locate your recorder model on the page and click Firmware to
download the file.
3. Locate the folder on your computer and unzip or extract the files.
The folder will contain two folders: upd_900s, and upd_900g2s.
Note The firmware file contains firmware for several HDIP recorder
models. Your recorder will select the appropriate version.
4. Connect a USB drive to your computer, copy both firmware folders
to your USB drive, and then remove the drive from your computer.
5. Insert your USB drive into any of the USB ports on your recorder.
6. Right-click the Live screen, and then select Menu.
7. Click Info and then click Software Upgrade.
8. A message will appear, instructing you to shut down and unplug the
HDIP recorder. Shut down and unplug the recorder, then plug it
back in and restart it.
Note Ignore this message when it appears after you have restarted
the recorder.
9. Repeat steps 6-8 and then click Upgrade.
Note Your HDIP recorder will restart itself during the upgrade
process. Once it has restarted, the firmware update is
complete.