User manual

48
Monitor Schedule
Monitor Schedule allows you to configure a custom sequence order to
be displayed when the main display has been set to sequence single
channels.
The number of sequencing positions available is equal to the total
number of channels on the recorder. A channel can appear in more than
one sequencing position. If not all sequencing positions are needed,
choose Circular to cause the sequence to return to the beginning.
Custom Sequence Example:
In this example the channel 1 camera needs to be seen more often, and
only the first 4 channels need to be viewed while sequencing. This
configuration will display in this order: CH1, CH2, CH1, CH3, CH1, CH4;
then the sequence starts over.
To set a monitor sequence schedule, follow these instructions.
1. Click Monitor Schedule.
2. Select the camera channels you want to be shown in the sequence
in the order you want them to appear.
3. Click Confirm to save your sequence.
Date/Time Display
Date/Time Display allows you to set the display of the time and date on
the live screen to be shown in one or two rows, or to be turned off. Click
Date/Time Display and select 1 Row, 2 Rows, or Off as desired.
Show Camera Name
Show Camera Name allows you to enable or disable the camera name
display in live view. Click Show Camera Name and select Yes or No as
desired.
Show System Name in Live
Show System Name in Live allows you to enable or disable the display
of the Unit Name (specified in the Network menu) on the main display.
To enable this function, click Show System Name in Live and select
Yes.