User manual

3222AD 47
DISPLAY
Use the Display menu to change the video output display settings.
VGA Resolution
VGA Resolution allows you to change the screen resolution for your
VGA or HDMI monitor. Available options are 1024x768, 1280x1024,
720p and 1080p. Click VGA Resolution and select the appropriate
resolution for your monitor.
Caution Do not choose a resolution that his higher than that of your
monitor. Doing so will result in an “out of range” or “no signal”
message. For details on the resolution, refer to the user
manual of your monitor.
Monitor Image Controls
You can adjust the image on your monitor using the monitor image
controls. To adjust a setting, click Num next to the item you want to
adjust, and then set the number in the field to your desired setting.
Monitor Brightness – Adjust the brightness of the monitor.
Monitor Contrast – Adjust the contrast on the monitor.
Monitor Chrominance – Adjust the color on the monitor.
Monitor Dwell
Monitor Dwell allows you to select the amount of time a camera or
screen division will appear on the live screen when the display has been
set to sequence (1 second – 120 seconds).
1. Click Monitor Dwell.
2. Click Num and use the on-screen keyboard or a USB keyboard to
enter the amount of time – OR – use the up and down arrow
buttons to select the number of seconds for the dwell.