User manual

3222AD 45

Alarm Out

Use this to enable one or both of the alarm outputs on the recorder.

Select A Only, B Only, A + B, or None.

Note For more information about wiring an external alarm, please

refer to the documentation for your alarm from your alarm

manufacturer.

Video Loss Detection

Set this option to On to trigger an alarm when the video feed from a

camera is lost. This can occur if the camera loses power, breaks, or if it

is vandalized or tampered with.

Motion Detection

Use this item to enable motion detection for the camera you have

selected. You can enable motion detection during Day, Night, Day and

Night, Weekend, Day and Weekend, Night and Weekend, or All

schedules. Schedules are configured in the Schedule menu.

When Motion Detection is enabled, the recorder will request motion

detection information from the camera. All AvertX cameras have motion

detection enabled by default, and the motion detection function on the

camera can be configured using your HDIP recorder.

Note Because the recorder itself does not perform any motion

detection, you will need to separately configure motion

detection on any manually-connected cameras. These include

any non-AvertX cameras as well as cameras that are

connected to your system using an external PoE switch.

Consult your camera user manual for configuration

instructions.