User manual

3222AD 41
Rotate a Camera Video Image
If your camera is installed on a wall or table top the image may appear
to be upside down. Rotate the camera video image using the recorder
interface to get a right-side-up image.
Note You cannot rotate the video image 90° to get a vertical image.
Rotating the image 90° will stretch and distort the video
image.
To rotate the camera video image:
1. In the Cameras setup menu, click Device Setup, and then Stream
Settings.
2. For Video Rotation, select the desired rotation type.
• Normal transmits the image as the camera sees it.
• Flip transmits the image backwards and upside down.
• Mirror transmits a mirror image.
• 180 Degree transmits the image upside down.
Activated
This option allows you to turn your camera on or off. Click Activated
and select Yes or No to activate or deactivate your camera.
Note In order to control this option, Enable PnP must be set to Off.
Status
This option allows you to view the streaming format, resolution, frame
rate, bandwidth and percentage of video loss for the selected camera.
Note To view this information, Activated must be set to On.
Copy Settings
You can copy the settings to be used on another channel. To do so,
Enable PnP must be set to Off, and Activated must be set to No.
1. Click Copy Settings.
2. Select the channels you want to export the camera settings to.
3. Click Confirm.
4. Set Activated to Yes.
5. Set PnP to On if desired.