User manual

38
Note An SMTP server makes it possible for your recorder to send
e-mail messages. You MUST have an SMTP server in order
for the e-mail function of the HDIP system to work. If you are
unsure of the information for your SMTP server, contact your
internet provider.
9. In the SMTP Server Setup window, set Email Via SMTP to On.
10. Type your desired SMTP Server, SMTP Port (the default is 25),
SMTP Account, and SMTP Password into the appropriate fields.
11. Set Use SSL Connection to On or Off as desired.
Note Secure Sockets Layer (SSL) is an added layer of encryption.
Use this option for added security for your alarm alert e-mails.
12. Close SMTP Server Setup.
13. Set E-mail Activate to On.
14. Repeat for up to two more e-mail recipients.
15. Close E-Mail Management.
CAMERAS
Use the CAMERAS menu to manually connect cameras and configure
camera channel settings; including camera name, camera settings, and
stream settings.
IP Camera Select
For each set of instructions in this section, you will need to select a
specific camera channel to configure. To select a channel, click IP
Camera Select and then click the channel you want to configure.
IP Camera Name
You can assign each camera a name by clicking IP Camera Name and
using the on-screen keyboard or a USB keyboard to type in the name.
AvertX recommends choosing a name that is descriptive of the location
of the camera, such as “Front Lobby,” or “Loading Dock.”