User manual

3222AD 33
Power Key Privilege
This option defines what prompts will be displayed when the power
button is held down for five seconds. There are four options to choose
from:
• Auth – Users will be prompted to log in with an authorized
account to shut down the recorder (the Password Protection
option, found in the Users menu, must also be enabled).
Enabling the Auth option will also enable the Confirm option.
• Confirm – When users shut down the recorder, a message will
appear asking them to confirm the shutdown.
• Direct – The recorder will automatically shut down without any
prompt or confirmation.
• Disable – This option disables any shutdown option via use of
the power button; leaving the Shutdown menu option as the
only way to turn the recorder off.
Auto Restart
Set your recorder to restart either every day or weekly by selecting the
day you want the recorder to restart. Once Auto Restart is enabled,
you can choose the time of day you want the recorder to restart.
Note If you have customized your camera settings and want to use
Auto Restart, ensure that PnP is set to Off. This will prevent
your recorder from overwriting your cameras settings when it
restarts.
USERS
The Users menu allows you to manage password protection, user
accounts, passwords, and permissions settings. The HDIP network
recorder provides eight built-in user accounts. You can customize the
username, password, and privilege level for seven of these accounts.
The preconfigured admin account has a permanently set username and
privilege, but you can change the password.
Password Protection
Password Protection allows you to require username and password
authentication to access menu functions. The option is set to Off by
default, meaning username and password are not required to access
any menu functions. Change this setting to On to require authentication
to access the recorder.
Default Administrator Username: admin
Default Administrator Password: 1234