User manual

26
CONNECTION GUIDE
Power Setup
WARNING:
To reduce the risk of electrical shock or
damage to the equipment:
Do not disable the power grounding plug.
The grounding plug is an important safety
feature.
If the electrical plug you are using does not
have a ground plug receptacle contact a
licensed electrician to have it replaced with a
grounded electrical outlet.
Plug the power cord into a grounded
(earthed) electrical outlet that is easily
accessible at all times.
Disconnect the power from the recorder by
unplugging the power cord either from the
electrical outlet or the recorder.
Monitor Setup
The recorder has the following connections available to attach a
monitor.
HDMI Output To TV / Digital Display
VGA
Connect to an analog
VGA Monitor
Connect the monitor or monitors to the rear of the recorder using the
cable supplied by the monitor manufacturer. Refer to the monitor
manual for detailed information on how to set up and use it.
Note The monitor must be capable of having a minimum screen
resolution of 1024 x 768 and display colors of at least 32 Bit