User manual

14
PREFACE
ABOUT THIS GUIDE
This manual is to be used as a reference for setting up the AvertX HDIP
network video recorder, and for troubleshooting any problems you might
encounter. If you are unable to solve any problems with this guide,
please contact AvertX support, or an authorized technician to repair the
unit.
AvertX reserves the right to make changes to the products represented
by this manual without notice.
The following text and symbols mark special messages throughout this
guide:
Note Notes indicate topics of interest intended to better your
understanding of this AvertX product.
TECHNICIAN NOTES
Warning Only authorized technicians trained by AvertX should attempt
to repair this recorder. All troubleshooting and repair
procedures indicated in this manual are to be used only for
reference and minor repairs. Due to the complexity of the
device, no end-user should attempt to make component
repairs or modifications to any printed wiring board. Improper
repairs can create a safety hazard. Any indications of
component replacement or printed wiring board modifications
may void any warranty.
Warning To reduce the risk of electrical shock or damage to the
equipment:
• Do not disable the power grounding plug. The grounding plug
is an important safety feature.
• Plug the power cord into a grounded electrical outlet that is
easily accessible at all times.
• Disconnect the power from the recorder by unplugging the
power cord either from the electrical outlet or the recorder.
Caution To properly ventilate your AvertX system, you must provide at
least 3 inches (7.6 cm) of clearance at the front and back of
the recorder.