User's Manual

CoreBlu X3 User Manual
Usage:
● CoreBlu X3 is designed to be mounted anywhere on various surfaces with the help of double
sided tape or screws to be detected by nearby smartphones.
● CoreBlu X3 is mainly used in indoor navigaon applicaons.
● CoreBlu X3 also includes a wide range of tools facilitang opmal setup, installaon and
health-checks.
● Long buon presses allow the beacons to restart/wakeup (if sleeping) and show indicaon in the
front LED.
Features:
● Bluetooth Radio
❖ Type: Bluetooth: Low energy 5.0
❖ Adversement: iBeacon, Eddystone & cBeacon (Averos Proprietary).
❖ Adversement Interval: 100ms to 10.2seconds.
❖ Frequency: 2.4GHz.
❖ Transmit Power: +4dBm to -20 dBm.
❖ Antenna Type: PCB antenna, Omni Direconal.
● Sensor
❖ Moon sensing: 3 Axis Accelerometer.
● Baery
❖ Baery type: ER14505 x 2, 4800mAh, Replaceable.
● Enclosure
❖ Material: ABS.
❖ Protecon Class: IP64.
● Operang Environment
❖ Temperature Range -20°C to 70°C.
❖ Operang Humidity 90%.
● User interface
❖ User interface buon.
❖ User indicaon LED.
Quick Start:
Aer unpacked the CoreBlu X3, we have the following steps to check the device quickly.
● Hardware Test
Press the buon for 5 sec and observe LED blinking in front of CoreBlu X3. The device will now
wake up from sleep mode.
R1.0 
Page 6 | 8 