Installation guide

Installation Guide
6
Connecting the Infrared Sensor
If you have the AVerMedia
®
TVPhone98 card :
Plug the supplied Infrared
Sensor Cable to the "IR
Input" connector (which is
the red 2.5mm stereo jack)
of the All-in-one Cable.
If you have the AVerMedia
®
TVCapture98 card :
Plug the supplied Infrared Sensor Cable
to the AVerMedia
®
TVCapture98
"REMOTE" port.
After connecting the Infrared Sensor Cable, position the infrared receiver on top of
the system unit facing towards you.
CAUTION!
Do not plug anything to the IR Input Connector of the All-in-one
Cable except for the infrared sensor cable. Connecting other
cables will cause devastating damage to the system!