Installation guide

Installation Guide

Windows 95

Plug and Play Installation

Before you install the driver, check first which version of Windows 95

you are

using. To check the version, click Start, then Settings, then Control Panel, and

double-click System. You will see the version under the General property sheet.

Make sure that you have inserted the Installation CD into your CD-ROM drive

before you proceed with the installation.

Installing the Driver to Windows 95

Version 4.00.950 and

4.00.950A

1. When you reboot your

machine for the first time,

Windows 95

will

automatically detect that you

have installed a new device.

The Add New Hardware

Wizard will appear. Click

Next to continue.

2. The New Hardware Found

dialog box will then appear. Select

Driver from disk provided by

hardware manufacturer and

click OK.

3. On the

Install from Disk dialog box, type :

Your CD-ROM Drive:\DRIVER\WIN9X

4. Next, the Select Device dialog box will appear. Just click OK.

5. After the driver has been successfully installed into your system, click Yes

to restart your computer and load the driver for use.