Specifications

59
3. In
Enable Time
, the number from 00 to 23 represent the time in 24-hour clock. Click the time
that user want to activate or deactivate the alarm function.
4. Select
Trigger Any
to activate if it falls to one of the conditions or
Trigger All
to activate if it falls
to all conditions.
5. Set condition of
Camera
.
-
Motion:
Click on the camera number to set the condition for the system to alarm.
-
Video Loss:
Click the camera number to set the alarm condition when video is lost.
6. Set condition of
Sensor
. Click on the sensor number to set the condition for the system to alarm.
If the sensor normal status is high, set the sensor condition to low.
7. Set condition of
Alarm reset
. Click the camera number to set the reset condition of alarm. Once
alarm is reset, all alarm action will stop at the moment.
8. Click
Next
to setup actions of alarm.
- Spot Monitor
To display alarm video on spot monitor when there is an alarm event occurred.
a. Select the camera from drop down list to specify which camera alarm video to be display
on sport when the alarm is occurred.
 Alarm Camera: when there has an alarm occurred, and then, the alarm video will be
display on the spot monitor.
 Camera # (1~16): Only selected channel has alarm event occurred, the alarm video
will display on the spot monitor.
b. Retrieve time: set the waiting duration for switching to next alarm video.