Specifications

9
Name
Function
(18)
Operate the PTZ cameras automatically based on the selected camera group
preset position number.
i
Without setup preset position, the preset button ( ) will not be
functional when press it. To setup preset position, please refer to
Chapter 3.2.3.
(19)
Adjust the PTZ lens to the position that user wants. And then, press
with number button to setup the PTZ camera preset position.
(20) Speed + / Speed -
To speed up movement of PTZ camera lens
To speed down movement of PTZ camera lens
(21) Focus + / Focus -
To focus in PTZ camera lens
To focus out PTZ camera lens
(22) Zoom + / Zoom -
To zoom in view of PTZ camera lens
To zoom out view of PTZ camera lens
1.2.2.1 To Set a Video Segment and Save
Keep a portion of the recorded video. Following the below steps to Set and Save the Wanted
Portion of the Recorded Video
1. While playback, press button and the A point of video segment is set. User should see the
word “
A-
“on upper right of surveillance screen.
2. Press again to set B point of video segment. User should see the word “
A-B
“ on upper
right of surveillance screen.
3. The DVR system will start repeat playback the video segment that user has set until user cancel
the video segment. Press again or right-click on playback screen will cancel the video
segment.
4. To save the video segment, left-click on the channel screen that user wants to save to switch to
single screen mode.
5. And then, Plug in the pen drive device.
6. Click and select
Segment
from playback menu.
7. Click
Save
to output the video segment to USB storage device. Mark
Include Player when
backup
to include the Qplayer application in output video segment folder for playback (see also
Chapter 2.5).