User`s manual

73
7.3 Familiarizing the Remote Console Buttons
(1) (3) (8)(7)(6)(5)(4)
(9)
(10)
(12)
(13)
(14)
(15)
(2)
(11)
Name Function
(1) Exit Close the Remote Console.
(2) Volume Enable/disable the sound.
(3) Split Screen
Mode
Select from six (6) different split screen type to playback the recorded video file of all the
camera, or one camera over the other or alongside on a single screen.
i
If there are only 4 cameras, you won’t be able to switch to 9, 16, and 13 split screen mode.
To change the video quality, right-click on the screen and select between High, Normal or Low.
(4) Record Start/stop video recording.
(5) EMAP Display the map in each area, the camera/sensor/relay location and the warning event. (see
also
Chapter 3.6)
(6) Network Enable/disable remote system access. This feature allows you to access DVR server from a
remote location via internet connection.
(7) Setup Configure the Remote Console setting. (see also Chapter 7.3.1)
(8) Preview Switch to Preview/Advanced mode. This allows you to view live camera display.
(9) Playback Switch to Playback mode. This allows you to view the recorded video file. (see Chapter 7.4)
(10) Status Bar Display the current date, time and hard disk free space.
(11) Camera ID Show the number of cameras that are being viewed. When you are in single screen mode,
click the camera ID number to switch and view other camera.
(12) Event log Show the record of activities that take place in the system. To filter the records, select and
click the option button to only display Event, System, Operation, Network or POS.
(13) Snapshot Capture and save the screen shot either in *.jpg or *.bmp format.
(14) Full screen Use the entire area of the screen to only display the video.
To return, Right click the mouse or press ESC on the keyboard.
(15) Alarm Alert and display warning info. Only Administrator-level can reset and turn on, off and trigger
the Sensor and Relay by right-clicking the item in the Sensor and Relay list.