User`s manual

56
~ Camera # (1~32): the selected channel would be snapshot when an alarm is occurred.
b. Video Size: select the size of snapshot picture.
c. Number of picture: the number of picture that is going to be taken.
d. Snapshot Interval: a time gap for next snapshot
e. Save Path: a storage path for saving snapshot pictures.
4.9.1 To Setup Alarm Relay:
1. Beside the Relay Output check box, click Detail.
2. In the Alarm Relay dialog box, select from the available relay list and in the
ON column, set to enable/disable the relay operation when the alarm is
activated.
3. In the Retrieve time check box, you may enable/disable to extend the relay
operation time and set the duration in second.
4. Click OK to exit and accept the setting and Cancel to exit without saving the
setting.
4.9.2 To Setup the Alarm Sound Setting:
1.
Beside the Play Warning Sound check box,
click
Detail
.
2.
In the Alarm Sound Setting dialog box, click
to select other wav file from other source
or folder,
Play
to listen,
Record
to make a
new copy of a sound.
3.
If you click
Record
, you will be prompted if
you want to replace the file. Click
OK
to
continue and
Cancel
to discontinue.