User`s manual

10
Name Function
(16) Touch Pad Work as a computer mouse. Using to control cursor on the screen.
To open and close touch pad, please follow the steps below:
1. Push the touch pad to open the touch pad
2. The touch pad will open to 15 degree
3. To close the touch pad, look for a button which
under the touch pad bottom (as figure shown).
4. And then, press the button and push back the
touch pad at the same time
Using AB Repeat Function
AB Repeat function allow user to set a video segment from A to B point and play on the surveillance screen
until user stop.
1.
Switch to Playback mode
2.
Press
to enter multiple function mode
3.
During the playback, press
11
to set the A point of video segment. User will see a triangle mark
on play progress bar.
4.
And then, press
11
again to set the B point of video segment. User will see another triangle mark
on play progress bar. To cancel AB repeat segment, press
11
again.
5.
The AB point segment can be saved by click
Output
button on Playback GUI
6.
In the Save As dialog box, locate on where you want to save the file, type the filename, and select the
video format.