User`s manual

105
Appendix B Removable Hard Disk Installation
Please following the below steps to install the removable hard disk on SA series. If install more than one hard
disk, remember to adjust the jumper to the right position.
1. Unlock the removable hard disk drawer then pull
it out
2. Connect the power connector to the hard disk
(master)
3. Carefully insert the hard disk in the removable
rack
4. Slide the drawer back
5. Lock the removable keylock
Before removing the removable hard disk drawer, the DVR Unit must be TURNED OFF and
unlock the removable hard disk drawer keylock.