User manual

91
 System Reboot: when the DVR system reboot without abnormal condition, the system
will send out the alarm message.
 Abnormal Reboot: when the DVR system reboot in irregular condition, the system will
send out the alarm message.
 Recording is switched off: when the recording has been stopped, the system will send
out the alarm message.
 Network is switched off: when the network connection of DVR system is lost, the
system will send out the alarm message.
 Hard Disk failed: when the hard disk doesn’t work normally, the system will send out the
alarm message.
 Temperature: set a temperature limited of system for system to alarm. When DVR
system temperature is over the temperature limited, the system will send out the alarm.
The system supports °C and °F temperature mode.
 Illegal Entry: any objects move between selected
regions which user has set up in Object Counting
section (see Chapter 5.2.1
), the system will send out
the alarm. Select the entry (object moves from
region 1 to 2 or from region 2 to 1) and click the
Detail to select the camera and the times for system
alarm.
9 Trigger if once: Send out the alarm when the
selected camera match the illegal entry has
selected.
9 Trigger if the amount exceeds: Send out the
alarm when the selected camera and illegal
entry times match the illegal entry has selected.
i
Only the camera has been setup in Object Counting will be available for
selecting in Illegal Entry.
- Enable/disable the POS Keyword check box, to scan the data from the POS if it matches
the keyword (see also Chapter 5.9.10
).
- Enable/disable the Alarm Message check box, to active with external alarm message by
your own program. For the detail configuration, please contact the local reseller.
- Enable/disable the Alarm Button check box, to active manual alarm function (see also
Chapter 4.3#(18)
). To define alarm message of manually alarm trigger. Click alarm button
and select the alarm button # and fill in the description of alarm button.