User manual

90
- Motion Detected: select and click on the camera number (01 to 16) to set the condition for
the system to alarm. Right click on the camera number to setup the Continuous trigger
duration of Motion detected. Enter the time period for system to send out the alarm when
motion has continuous detected for a period.
- In Video Loss, click the camera number (01 to 16) to set the alarm condition when video is
lost.
- In Missing and Suspicious Object Detected, click the camera number and select the
certain object on the screen (right click on camera number for detailed setting)), and when
the certain object is missing or doubtful, the system will alarm.(see also Chapter 5.9.12
) In
Scene Change, when the camera has been moved, the system will alarm, too.
- In Audio Detect, click the camera number to set the alarm condition when detect the
abnormal audio.
 In (4) Sensor, select and click on the sensor number (use W and X to select the sensor) to set
the condition for the system to alarm. If the sensor normal status is high, set the sensor condition
to low.
Click IP Camera Sensor to configure sensor status of IP camera. Click High/Low to set sensor
status to high or low.
- Continue trigger duration: Set a time period for system to send out the alarm when sensor
has been trigger and stay in the same status for a period.
- Enable/disable the Abnormal Event check box, to set the condition of the event for system
to alarm.