User manual

5.3 Recording Setting

In the Recording dialog box, click OK to accept the new settings, click Cancel to exit without saving,

and click Default to revert back to original factory setting.

The gray selections are not support for IP camera.

(1) Camera Icons

Select the camera number you want to set the recording setting. To select all the cameras, enable the

ALL check box. To select more than one camera, Right click on the camera icon. To select one

camera only, Left click on the camera icon. The camera icon turns red when it is selected.

(2) Recording Mode

The blocks from 00 to 23 represent the time in 24-hour clock. To record in full 24 hours, select the

recording mode and click the ~ button. If you want to only record at a particular time, click the colored

block beside the recording mode then click on the time blocks.