User manual

69
5.2.1 Setup the Object Counting
1. Click Detail to enter the object counting setup window.
2. Enable Detected Regions in Display section. This enables the object counting information show
on the screen. Moving Object will enable the object size frame to show on the screen.
3. Click Region1 and press left button of mouse and drag the area that user wants the object to be
counted. And then, click Region2 and drag another area that user wants the object to be counted,
too. Those selected regions will mark in different color. The system will count the objects that
move between the selected regions.
4. Click Object size to define the detected object dimensions. Press left button of mouse and drag
on the screen. To see the object size frame on screen, enable Moving Object in Display section.
5. Adjust the Sensitive of object detecting.
6. To test the setting, mark the Directions (In/Out) want to be test and click Start. The testing result
will show in Test section.
7. Enable Reset Counter to manual or auto reset counter.
9 Auto reset counter: Select the counter reset by every hour, every 12 hours, or every day
automatically.
9 Reset the counter now: reset counter manually.
8. Click OK to save the setting. Click Cancel to leave the setup window without saving.
9. The object counting information will be display on the screen of upper part.