User manual

64
5.2 Camera Setting
In the Camera Setting dialog box, click OK to accept the new settings, click Cancel to exit without
saving, and click Default1/ Default2 to revert back to original factory setting.
(1) Camera Icons
Select the camera number you want to adjust the video setting. To select all the cameras, enable the
ALL check box. To select more than one camera, Right click on the camera icon. To select one
camera only, Left click on the camera icon. The camera icon turns red when it is selected.
(2) Enable
Set to enable/disable the selected camera. When there is no video source on the camera, we suggest
disabling it so that the system won’t detect it as video loss error.
(3) Camera
- Display
Enable/disable to show the video. Even if the video of the selected camera is hidden you can
still record the video and preview it in playback mode.
- Name
Change the camera name.
- Description
Add a short comment.
(4) IP Camera Information
Display the camera information, such as camera protocol, model, video type, IP address, and
channel number. If the camera hasn’t been configured, those information are blank.
(5) Object Counting
Select the two regions on the screen and the system will count the objects that appear from one
selected region to another selected region.(See also Chapter 5.2.1
).
(6) IP Camera Setting
Configure the camera for monitoring. Click IP setting to enter configuration interface. Click Save&Exit
to save the setting and exit the IP Camera Setting window. Click Connect to connecting with IP
camera right away. To cancel the setting click Cancel.
- Protocol: select the brand of camera. Drag down the list and select the brand of camera. User
also can click Search Device to find the selected protocol of camera on the LAN network.