User manual

49
- Beep if no signal
Make sound when the video signal is lost.
- Shutdown OS when exit
Turn off the PC when the DVR application is being closed.
- Mandatory Record
Always record video when software is running
- Enable Overlay
To enhance video signal for better video quality.
- Screen Saver
Set a period time to enter screen saver mode when system idle.
- Auto Scan Period
Set the time gap of the Auto Scan function from 3 to 10 seconds. This automatically switches to
the next video in cycle depending on the set time gap.
- Temperature Display
Select the format of temperature -- °C or °F
- Playback Mode
Select the mode of playback the video.
9 Select date and time: Select the date and time which user wants to playback.
9 Play the last file: Automatically playback the video from the last hour
9 Instant Playback: Automatically playback the video which has just recorded. To set the
instant playback time period, fill in the time in second at Set Instant Playback’s Play Time
column.
- Date Format
Select the date format which wants to display in Select date and time playback mode
(10) Dual Monitor
Enable/disable dual monitor display. Click Setting to select the dual monitor display mode.
(11) POS
Set from which camera screen to display the data from the POS equipment. Click Setting, to set the
POS Console Setting. (see also Chapter 5.1.1
)
(12) UPS (Uninterruptible Power Supply)
Protect the system from damaging, such as power surges or brownouts. This automatically gives time
to close the DVR properly when the battery backup power has reached the Shutdown when capacity
below percentage level setting. The UPS device must be connected to your computer (refer to your
UPS user’s guide).